LiAir H800

LiAir H800 has light weight design, and can be carried by DJI M300 or M350. With longer scanning range, better penetration ability, it performs better than mini-LiDAR systems in forestry, emergency disaster surveys, and long-range powerline inspections, etc.

System Parameters

Detection Range 350 m @ 10% reflectivity 790 m @ 50% reflectivity 1000 m @ 80% reflectivity Dimensions 249×102×163.3 mm Weight 2.25 kg System Accuracy (Vertical) ±5 cm Voltage 18~24 V Storage 512 GB TF Card Power Consumption 61 W Storage Temperature -30~60 ℃ Communication WiFi Operating Temperature -20~50 ℃

LiDAR Sensor Parameters Wavelength 1535 nm Repeatability Accuracy 3 mm @100 m FOV 100° Scan Rate 100,000~2,000,000 pts/s

Number of Returns Unlimited Waveform Returns [1] Inertial Navigation System GNSS GPS, GLONASS, Galileo, BDS Azimuth Accuracy 0.019° IMU Data Frequency 1000 Hz Attitude Accuracy 0.006°

Camera Parameters Pixels 26 MP Focal Length 16 mm / 24 mm ( Equiv. Focal Length ) Camera Parameters 6252×4168 Software Control Software GreenValley Pre-processing LiGeoreference Post-Processing LiDAR360 / LiPowerline (Optional) Compatible Platforms DJI M300/350 RTK, DJI M400, GDU S400E, CW15, Autel Alpha, FOXTECH, VILVERIN VL340, can be mounted on Helicopter

[1] The theoretical maximum number of returns can only be achieved under specific conditions and is constrained by the actual test scenario.